Trade Thread

[vintagefisher]

So here is how this works... Post the stuff you have that you'd be willing to trade and items that you want and TRADE! This seemes to work over at MTBR in the SS section so hopefully we can get something here going localy.

Here, i will start.

HAVE

-Ergon GC2 grips (the ones with bar ends)

-a 16t TomiCog (bolts to where your rear rotor would go and you reverse you wheel and have a Fixed gear.



WANT

-Thule lock cores (4) I have N143s, but if you have the key i will take whatever.

-non bar end ergons just need usable condition. (will trade striaght up for my bar end ones)

- carbon 27.2 x 350mm seat post

-110mm BCD 5 bolt rings 36 or 38

-maybe other crap but i ride rigid SS.

Post what you have and want!

[RMXByker]

I think most people have pretty much just been using the "Pay it Forward" thread but maybe it would make sense to have another thread...

[vintagefisher]

i thought about that, but i dont want to give away, just trades.

[mobilechimp]

Good idea. I stuck it to the announce section. Happy trading!

[rmp]

Have: Salsa ProMoto carbon riser bar (25.4 clamp size). Uncut, excellent condition.

http://salsacycles.com/components/pm_carbon_low-rise/

Want: high sweep (11 degrees +) bar-end compatible flat bar (bar ends would be a bonus).

[cchopp]

Have: Campagnolo Record Cranks 175 w/ 52t campy brev ring, CAMPAGNOLO RECORD CARBON 102 mm ENGLISH square BOTTOM BRACKET

Want: Crankset and brakes for cyclocross build. Or Carbon Cyclocross fork.

[jon_cross]

Have: 58cm Orbea Starship with EC90 fork, Velomax Ascent II wheels, full Campy Chorus grouppo (10 spd)

Want: 19"/Large 29er hardtail, OR light DH/freeride bike (hardtails would be considered here...)

[MediumRB]

Have: Campagnolo Record Cranks 175 w/ 52t campy brev ring, CAMPAGNOLO RECORD CARBON 102 mm ENGLISH square BOTTOM BRACKET

Want: Crankset and brakes for cyclocross build. Or Carbon Cyclocross fork.

I have a Salsa carbon CX fork (alum 1 1/8" steerer) for dual pivot road brake calipers only (no canti or disc mount). It does have fender tabs!

[aard]

PM for details, located in Troy, right off of 75.

HAVE:


SLX crankset excellent condition
XT crankset (2010) SS setup (32t and matching silver bash)
xpedo spds (lighter than XTR)
Blue Crank Brothers Candy pedals (will check exact model)
White Sette post (31.6 x 400)
White Elixir 5s
Rampages (2) 29x2.35 Kevlar
Red King 1 1/8 HS (cosmetic wear, non matching top cap)
Older Race X Lite 105 x 7 31.8 stem

WANT:
Wide big sweep handlebars (flat, riser, H/J-Bar, Luv Handles, Salsa Bend, etc...)
Fast rolling 29er tires
Fatbike rim and Tire
DAG
flip flop hub
Road stem with 26.0 clamp



Will continue to update as time allows...

[Laser4G63]

I would like to trade this stem for something similar but in a 90mm length. Must be black and in same condition.

[weststonylake]

willing to trade 32 gig ist gen ipad leather case, skin and charge w/ cable for a decent bike what do you have to offer

[Hudnut]

I just bought a set of brand new Ergon GP1 size large to see if i'd like the size. I don't. Anyone have a set of new to nearly new size small that they'd like to trade? I frequent between warren > berkley > brighton and areas in between.

[rmp]

I have a set of XT 985 Hydros. The new, nice ones. 160mm ice tech rotors (6 bolt) . Calipers, levers, rotors - install and go.

Looking to trade for a set of BB7 calipers and IS mounts/rotors. + some cash. Bonus for 180F/160R setup

Lines on mine are WAY long, should fit anything. Also have everything that came with them. bleed blocks, travel spacers, extra olive kit. Perfect shape, low miles, never crashed. These work awesome but are totally overkill for my Fatbike. Want to pull some $ out for another project.

[MediumRB]

I have:

Brand new Crank Brothers Cobalt 2 seatpost in the box, black, 31.6x400mm with 20mm setback, $50 (does not clamp on my Brooks rails?!!?)
Prologo Scratch Pro saddle, white, $50 (very little use, clean)
Schwalbe Lugano 700x23c road tires, wire bead, mounted but never ridden, $40 (for the pair)
Schwalbe Lugano 700x23 road tires, folding kevlar bead, mounted but never ridden, $60 (for the pair)

I need:

29'r front 6-bolt disc wheel (okay if it has braking rim, too), decent quality but not crazy expensive type
Avid BB-7 road disc caliper (fits 140r/160f disc)

[vintagefisher]

PM for details, located in Troy, right off of 75.

HAVE:
Bonty XR1 exp 29 x 1.9
White phenom 143
white bonty affinity rxl ti brand new
Titec J bars
bonty RL risers OS
Bonty big sweep flat bars OS
SLX crankset
XT crankset (2010) minus 22t and BB
xpedo spds (lighter than XTR)
White Sette post (31.6 x 400)
Med. 17" red Paragon frame 2007
white elixir 5s


WANT:

700c wheelset (flip flop hub ideally, but freehub OK).
bullhorn type handlebars

BB7s
truing stand
Brake levers for drop bars (not a roadie, not sure what they're called. Like STIs but without shifters


Will continue to update as time allows...

sent you a PM about bars and cranks. i have brakes and bars